Pax 900

Very powerful two-speed fan

Pax 900 has a two-speed ball bearing motor that runs very silently at low speed. A high pressure capability and high capacity make the fan particularly suitable for buildings with several storeys and demanding ventilation conditions. Designed for installation in ducts from 100 mm diameter. The fan is simple to install and easy to clean. Thanks to the ball bearing motor, it can be installed in ceilings or on walls. The fan must be earthed. Electrical installation work must be done by a qualified electrician.

Pax 900 Fan
Effect: 38W
This product has been discontinued


Description

If Pax 900 is connected to a ventilation duct without natural ventilation, Pax backdraught shutter 900 must be fitted. It is a good idea to also supplement the fan with the 990 moisture and timer control accessory. Designed as an insert model, it can be accommodated in ventilation ducts with an inner diameter of at least 100 mm. Approved for bathrooms and other wet rooms where natural ventilation is insufficient. Electrical work must be done by a qualified electrician.

Specifications

1403-1
Designation
Pax 900 Fan
Article no.
1403-1
EAN
7391477140317
Colour/Finish
White
Material
ABS plastic
Power consumption
38W
Voltage/Frequency
230V AC 50Hz
IP code
IP44 (zone 1)
Insulation class
Class I must be protectively earthed
Certificate
Intertek S Mark
Labels
CE
Connection
Hidden
Free blowing capacity
120 m3/h
Maximum pressure
160 Pa
Noise pressure level – at min. rPM
25 dB(A) 3 m
Noise pressure level – at max. rPM
48 dB(A) 3 m
Duct Ø [mm]
Ø100–Ø200 mm
Placement
Wall or ceiling
Type of motor
Ball bearing
Electrical installation
Note: All permanent electrical installation work must be done by a qualified electrician.
Dwg Pax900

Accessories
Download